snaptools
Binary to Hex
⌃⏎ run · clear · / focus input
Decimal · base 10
Hexadecimal · base 16
send result to
no matches
Binary · base 2
Octal · base 8
Enter a binary value above to convert it
// about this tool

Binary to Hex Online

Updated 2026-07-09

Convert binary to hexadecimal online for free. Paste a binary value — spaces between groups are fine — and SnapTools shows its hex representation instantly, in your browser. Nothing you enter is uploaded.

Long binary strings are hard to read, so they are almost always written in hex, where every four bits collapse into a single digit. This converter does that grouping for you, turning a wall of ones and zeros into a compact hex value ready to copy — handy for byte values, colours, and low-level debugging. For every base at once, use the Number Base Converter.

// how to use

  1. 1 Paste or type a binary value into the input (spaces between groups are fine).
  2. 2 SnapTools converts it to hexadecimal as you type.
  3. 3 Copy the hex result, or open the Number Base Converter for all bases at once.

// examples

Full byte
Input
11111111
Output
FF
Nibble
Input
1010
Output
A

// common uses

Compressing a long binary string into readable hex Reading raw bits as byte or colour values Learning how binary maps to hexadecimal Verifying a manual binary-to-hex conversion

// faq

No. The conversion runs entirely in your browser, so nothing you enter leaves your machine.
Group the bits into fours from the right, then replace each group with its hex digit — 1111 is F, 1010 is A. Pad the leftmost group with zeros if needed. This tool does the grouping for you.
Hex letters are shown in upper case (FF, not ff), the most common convention for byte and colour values. Either case means the same number.
Yes. Spaces separating your binary groups are ignored, so you can paste readable byte-spaced binary straight in.
Binary only uses the digits 0 and 1. Any other character is flagged so you can fix it instead of getting a wrong result.

Use this via API

Get a free API key →
curl -X POST https://snaptools.dev/api/v1/tools/binary-to-hex \
  -H "Authorization: Bearer YOUR_API_KEY" \
  -H "Content-Type: application/json" \
  -d '{"number":"11111111"}'
Esc
↑↓ navigate open Esc close